[Quick Tips - Password Policies]: How to set password policies in Linux

How to set password policies in Linux

Even Linux is secure by design, there are many chances for the security breach. One of them is weak passwords. As a System administrator, you must provide a strong password for the users. Because, mostly system breaches are happening due to weak passwords.
This tutorial describes how to set password policies such as password length, password complexity, password expiration period etc., in DEB based systems like Debian, Ubuntu, Linux Mint, and RPM based systems like RHEL, CentOS, Scientific Linux.

Set password length in DEB based systems

By default, all Linux operating systems, requires password length of minimum 6 characters for the users. I strongly advice you not to go below this limit. Also, don’t use your name, parents, spouse or kids name, or your date of birth as a password. Even a novice hacker can easily break such kind of passwords in minutes. The good password must always be more than 6 characters with a number, a capital letter, and a special character.
Usually, the password and authentication-related configuration files will be stored in /etc/pam.d/ location in DEB based operating systems.
To set minimum password length, edit/etc/pam.d/common-password file;

$ sudo nano /etc/pam.d/common-password

Find the following line:

password [success=2 default=ignore] pam_unix.so obscure sha512

And add an extra word: minlen=8 at the end. Here I set the minimum password length as 8.

password [success=2 default=ignore] pam_unix.so obscure sha512 minlen=8

Save and close the file. So, now the users can’t use less than 8 characters for their password.

Set password length in RPM based systems

In RHEL, CentOS, Scientific Linux 7.x systems, run the following command to set password length.

# authconfig --passminlen=8 --update

To view the minimum password length, run:

# grep "^minlen" /etc/security/pwquality.conf

Sample output:

minlen = 8

In RHEL, CentOS, Scientific Linux 6.x systems, edit /etc/pam.d/system-auth file:

# nano /etc/pam.d/system-auth

Find the following line and add the following at the end of the line:

password requisite pam_cracklib.so try_first_pass retry=3 type= minlen=8 

As per the above setting, the minimum password length is 8 characters.

Set password complexity in DEB based systems

This setting enforces how many classes, i.e upper-case, lower-case, and other characters, should be in a password.
First install password quality checking library using command:

$ sudo apt-get install libpam-pwquality

Then, edit /etc/pam.d/common-password file:

$ sudo nano /etc/pam.d/common-password

To set at least one upper-case letters in the password, add a word ‘ucredit=-1’ at the end of the following line.

password        requisite                       pam_pwquality.so retry=3 ucredit=-1

Set at least one lower-case letters in the password as shown below.

password        requisite                       pam_pwquality.so retry=3 dcredit=-1

Set at least other letters in the password as shown below.

password        requisite                       pam_pwquality.so retry=3 ocredit=-1

As you see in the above examples, we have set at least (minimum) one upper-case, lower-case, and a special character in the password. You can set any number of maximum allowed upper-case, lower-case, and other letters in your password.
You can also set the minimum/maximum number of allowed classes in the password.
The following example shows the minimum number of required classes of characters for the new password:

password        requisite                       pam_pwquality.so retry=3 minclass=2

Set password complexity in RPM based systems

In RHEL 7.x / CentOS 7.x / Scientific Linux 7.x:
To set at least one lower-case letter in the password, run:

# authconfig --enablereqlower --update

To view the settings, run:

# grep "^lcredit" /etc/security/pwquality.conf

Sample output:

lcredit = -1

Similarly, set at least one upper-case letter in the password using command:

# authconfig --enablerequpper --update

To view the settings:

# grep "^ucredit" /etc/security/pwquality.conf

Sample output:

ucredit = -1

To set at least one digit in the password, run:

# authconfig --enablereqdigit --update

To view the setting, run:

# grep "^dcredit" /etc/security/pwquality.conf

Sample output:

dcredit = -1

To set at least one other character in the password, run:

# authconfig --enablereqother --update

To view the setting, run:

# grep "^ocredit" /etc/security/pwquality.conf

Sample output:

ocredit = -1

In RHEL 6.x / CentOS 6.x / Scientific Linux 6.x systems, edit /etc/pam.d/system-auth file:

# nano /etc/pam.d/system-auth

Find the following line and add the following at the end of the line:

password requisite pam_cracklib.so try_first_pass retry=3 type= minlen=8 dcredit=-1 ucredit=-1 lcredit=-1 ocredit=-1

As per the above setting, the password must have at least 8 characters. In addtion, the password should also have at least one upper-case letter, one lower-case letter, one digit, and one other characters.

Set password expiration period in DEB based systems

Now, We are going to set the following policies.

1. Maximum number of days a password may be used.
2. Minimum number of days allowed between password changes.
3. Number of days warning given before a password expires.

To set this policy, edit:

$ sudo nano /etc/login.defs

Set the values as per your requirement.

PASS_MAX_DAYS 100
PASS_MIN_DAYS 0
PASS_WARN_AGE 7

As you see in the above example, the user should change the password once in every 100 days and the warning message will appear 7 days before password expiration.
Be mindful that these settings will impact the newly created users.
To set maximum number of days between password change to existing users, you must run the following command:

$ sudo chage -M <days> <username>

To set minimum number of days between password change, run:

$ sudo chage -m <days> <username>

To set warning before password expires, run:

$ sudo chage -W <days> <username>

To display the password for the existing users, run:

$ sudo chage -l sk

Here, sk is my username.
Sample output:

Last password change : Feb 24, 2016
Password expires : never
Password inactive : never
Account expires : never
Minimum number of days between password change : 0
Maximum number of days between password change : 99999
Number of days of warning before password expires : 7

As you see in the above output, the password never expires.
To change the password expiration period of an existing user,

$ sudo chage -E 24/02/2017 -m 5 -M 90 -I 10 -W 10 sk

The above command will set password of the user ‘sk’ to expire on 24/02/2017. Also the the minimum number days between password change is set 5 days and the maximum number of days between password changes is set to 90 days. The user account will be locked automatically after 10 days and It will display a warning message for 10 days before password expiration.

Set password expiration period in RPM based systems

This is same as DEB based systems.

Forbid previously used passwords in DEB based systems

You can limit the users to set a password which is already used in the past. In layman terms, the users can’t use the same password again.
To do so, edit/etc/pam.d/common-password file:

$ sudo nano /etc/pam.d/common-password

Find the following line and add the word ‘remember=5’ at the end:

password        [success=2 default=ignore]      pam_unix.so obscure use_authtok try_first_pass sha512 remember=5

The above policy will prevent the users to use the last 5 used passwords.

Forbid previously used passwords in RPM based systems

This is same for both RHEL 6.x and RHEL 7.x and it’s clone systems like CentOS, Scientific Linux.
Edit /etc/pam.d/system-auth file,

# vi /etc/pam.d/system-auth

Find the following line, and add remember=5 at the end.

password     sufficient     pam_unix.so sha512 shadow nullok try_first_pass use_authtok remember=5