[Ubuntu]: How to configure, update and auto login Ubuntu 12.04 LTSP Fat Clients

How to configure, update and auto login Ubuntu 12.04 LTSP Fat Clients

This guide is based on the comprehensive LTSP documentation done by the Ubuntu Community - Ubuntu Community Documentation - UbuntuLTSP

This guide is intended as a relatively easy step by step guide to:

• Configure Ubuntu 11.04, 11.10 and 12.04 fat clients.
• Update and Upgrade fat clients
• Install software on fat clients
• Auto login fat client users.
• Configure fat client user experience.
• Last updated : 14-09-2012

Requirements:

• Ubuntu 11.04/11.10/12.04 x64 machine with LTSP server configured and running. See How to create a Ubuntu 12.04 x64 LTSP server with 32bit thin clients.
• 1 x Network switch / hub
• 1 x Router with internet connection
• Thin/Fat client computer. This can be any network boot enabled machine, or a Virtual machine like VirtualBox. See How to create a VirtualBox Ubuntu LTSP Thin Client.

---

1. Disable root login on fat clients.

• To disable root login from thin clients edit the ssh_config file .
• Open the Terminal Window and enter :

sudo gedit /opt/ltsp/i386/etc/ssh/ssh_config

• Change the following if set or add to the bottom of the config file :

PermitRootLogin no

2. Copy DNS and Repository information from server to fat client to sync updates.

• To update the DNS information on the fat client image simply copy your LTSP server DNS details to the client image.
• Open the Terminal Window and enter :

sudo cp /etc/resolv.conf /opt/ltsp/i386/etc/resolv.conf

• An easy way to install software sources for fat clients is to install the repositories on the LTSP server and then copy the software sources to the fat client image.
• Open the Terminal Window and enter :

sudo cp /etc/apt/sources.list /opt/ltsp/i386/etc/apt/sources.list
sudo cp /etc/apt/sources.list.d/* /opt/ltsp/i386/etc/apt/sources.list.d/

3. Update & Upgrade fat client installation.

• For normal updates open the Terminal Window and enter :

sudo chroot /opt/ltsp/i386 apt-get update 
sudo chroot /opt/ltsp/i386 apt-get upgrade 

• When done, update the client image

sudo ltsp-update-image --arch i386

• For Kernel updates do the following from the Terminal :

export LTSP_HANDLE_DAEMONS=false
sudo mount --bind /dev /opt/ltsp/i386/dev
sudo chroot /opt/ltsp/i386
mount -t proc proc /proc
apt-get update && apt-get dist-upgrade
exit
sudo ltsp-update-kernels
sudo umount /opt/ltsp/i386/proc
sudo umount /opt/ltsp/i386/dev

• When done, update the client image

sudo ltsp-update-image --arch i386

4. Install additional fat client software.

• If you have added the Google Chrome PPA's details to your software sources, and copied these sources in step 2. you will be able to install Google-Chrome, open the Terminal Window and enter :

sudo chroot /opt/ltsp/i386 apt-get install google-chrome-stable 

• To install the Flash Plugin for your thin/fat clients, open the Terminal Window and enter :

sudo chroot /opt/ltsp/i386 apt-get install flashplugin-installer

• To replace Gnome-Screensaver (Black screen only) with XScreensaver, open the Terminal Window and enter :

sudo chroot /opt/ltsp/i386 apt-get remove --purge gnome-screensaver 
sudo chroot /opt/ltsp/i386 apt-get install xscreensaver xscreensaver-gl

• When done, update the client image

sudo ltsp-update-image --arch i386

5. Autostart software on all fat clients.

• To autostart a program for all fat client users is fairly easy, simply copy the .desktop shortcut of the application to the/etc/xdg/autostart folder.
• If you want to start google-chrome and xscreensaver for all fat client users open the Terminal Window and enter :

sudo cp /opt/ltsp/i386/usr/share/applications/google-chrome.desktop /opt/ltsp/i386/etc/xdg/autostart/
sudo cp /opt/ltsp/i386/usr/share/applications/xscreensaver-properties.desktop /opt/ltsp/i386/etc/xdg/autostart/xscreensaver.desktop

• Tip: To autostart Google Chrome in full screen mode on a specific webpage, edit the new autostart google-chrome.desktopfile and add --kiosk and you site URL as shown below :

[Desktop Entry]
X-AppInstall-Package=google chrome
X-AppInstall-Popcon=39584
X-AppInstall-Section=universe
Version=1.0
Name=Google Chrome
GenericName=Web Browser
Comment=Access the Internet
Exec=/opt/google/chrome/google-chrome --incognito --kiosk http://www.google.com
Terminal=false
X-MultipleArgs=false
Icon=google-chrome
Type=Application
Categories=Network;WebBrowser;
MimeType=text/html;text/xml;application/xhtml_xml;x-scheme-handler/http;x-scheme-handler/https;x-scheme-handler/ftp;
X-Ayatana-Desktop-Shortcuts=NewWindow;NewIncognito

[NewWindow Shortcut Group]
Name=New Window
Exec=/opt/google/chrome/google-chrome
TargetEnvironment=Unity

[NewIncognito Shortcut Group]
Name=New Incognito Window
Exec=/opt/google/chrome/google-chrome --incognito
TargetEnvironment=Unity

• Now edit the new autostart xscreensaver file and replace "-demo" with "-nosplash" :

sudo gedit /opt/ltsp/i386/etc/xdg/autostart/xscreensaver.desktop

6. Auto login fat clients based on IP address.

• To auto login clients you need to supply the usernames and passwords for each user based on the IP address of the client machine.
• For the Terminal Window and enter :

sudo gedit /var/lib/tftpboot/ltsp/i386/lts.conf 

• Replace the usernameX and passwordX with the username and password for each user  :

[Default] 
# Local Apps 
LOCAL_APPS = True 
LOCAL_APPS_MENU = True 
LOCAL_APPS_MENU_ITEMS = firefox, google-chrome 

# Network settings 
DNS_SERVER = 192.168.1.1 
LDM_DIRECTX = True 

# Theme Settings 
LDM_THEME = ubuntu 

# Restrictions 
LOCALDEV_DENY_CD = True 
LOCALDEV_DENY_USB = True 
LOCALDEV_DENY_INTERNAL_DISKS = True 

# Auto Login 
LDM_AUTOLOGIN = True 

[192.168.1.21] 
LDM_USERNAME = username1 
LDM_PASSWORD = password1

[192.168.1.22] 
LDM_USERNAME = username2 
LDM_PASSWORD = password2 

[192.168.1.23] 
LDM_USERNAME = username3 
LDM_PASSWORD = password3
 
[192.168.1.24] 
LDM_USERNAME = username4 
LDM_PASSWORD = password4 

[192.168.1.25] 
LDM_USERNAME = username5 
LDM_PASSWORD = password5 

How to create a Ubuntu 12.04 x64 LTSP server with 32bit thin clients


This guide is based on the comprehensive LTSP documentation done by the Ubuntu Community - Ubuntu Community Documentation - UbuntuLTSP

This guide is intended as a relatively easy step by step mostly graphical (GUI) guide to:

Set up a basic Ubuntu LTSP server on Ubuntu 11.04, 11.10 and 12.04 x64 (64bit)
Configure Ubuntu 32bit thin- and fat clients with internet access.
Last updated : 15-04-2012


Requirements:

Ubuntu 11.04/11.10/12.04 x64 machine with two network adaptors to act as your main LTSP server.
1 x Network switch / hub
1 x Router with internet connection
Thin client computer. This can be any network boot enabled machine, or a Virtual machine like VirtualBox. See How to create a VirtualBox Ubuntu LTSP Thin Client.


Setup:

Connect the Ubuntu 11.04/11.10 x64 machine to the internet on one network adaptor. (in this case a wifi connection to internet)
Connect the other available network adaptor to a Network switch / hub. (This is where thin clients will connect)





1. Change your available network adaptor IP to a fixed entry.

Most local network already use the 192.168.0.xx range of IP addresses, but the default install of LTSP relies on this range being available. In this tutorial we will set up the LTSP network on the 192.168.1.xx range.
You also need a separate network adaptor with internet access during the install process.
The LTSP server install wants to install it's own DHCP server, so if you have a router with it's own DHCP server it could cause conflicts if in the same network IP range.
So what to do is change your unused LAN port's IP address to a fixed IP in another IP range. For example my setup has a router with a DHCP server running on 192.168.0.1, and provides the Internet access on the system.  I changed my other LAN adaptor's IP to 192.168.1.1 , this will be used for the LTSP network.
NOTE: For some reason the DHCP server does not want to start correctly on system startup if the network adaptor's IP is not set in the network interfaces config file. (see 1d. below)


1a. Go to Network Connections and select the LAN network adaptor you intend to use for your thin client network and click edit.



1b. Change your adaptor to use Manual IP and set a new fixed IP for the adaptor and save.

This will be your LTSP server IP.



1c. Set the fixed IP for the network adaptor the classic way to ensure the DHCP server starts correctly.

Add the information for your network adaptor that you selected in 1c. as shown below. 
We added eth0 with a static IP of 192.168.1.1
Open the Terminal Window and enter :

sudo gedit /etc/network/interfaces



1d. Change the Network Manager config file to allow control of your network adaptor with fixed IP.

For some mysterious reason if you enter the IP manually in the interfaces file, Network Manager ignores them and you cannot use the Network Manager to control the adaptor any more. So we have to enable it.
Change the "managed=false" to "managed=true" as seen below.
Open the Terminal Window and enter :

sudo gedit /etc/NetworkManager/NetworkManager.conf





2. Install the LTSP server.

Open the Terminal Window and enter :

sudo apt-get install ltsp-server-standalone openssh-server

​

3. Edit the DHCP configuration for your LTSP server to match your chosen IP range.

In this case 192.168.0.xx changes to 192.168.1.xx.
Open the Terminal Window and enter :

sudo gedit /etc/ltsp/dhcpd.conf





​4. Select the network interface/s for the DHCP server

Add the network devices you would like the DHCP server to run on. In this case we changed the value of INTERFACES to include eth0
Open the Terminal Window and enter :

sudo gedit /etc/default/isc-dhcp-server





​5. Restart the DHCP server

Open the Terminal Window and enter :

sudo /etc/init.d/isc-dhcp-server restart

Tip: previous ubuntu versions need to use : sudo /etc/init.d/dhcp3-server restart 



6a. Optional step to configure a Fat Client not a Thin Client before build

This step is only needed if you intend to use your LTSP server for Fat clients, rather than Thin clients or both. For more information between the differences between Thin and Fat clients and configuration see UbuntuLTSPFatClients 
This step edits the LTSP build client configuration file to install Ubuntu desktop and create LTSP Fat client image. 
NOTE: only software installed in the Fat client image will be available to the client, and internet access for each client needs to be configured as the clients will not share the server network connection to the internet as is the case with the thin clients.
Open the Terminal Window and enter :

sudo gedit /etc/ltsp/ltsp-build-client.conf

Here you can customize your installation image for Fat clients.
We will only install the standard Ubuntu Desktop system to run on the client side for now. We can install more software to the image later, this is to get a basic Fat client image built.
Add the following to the file and save.

# ltsp-build-client.conf - many other options available 
# The chroot architecture.
ARCH=i386

# ubuntu-desktop and edubuntu-desktop are tested.
# Ubuntu 12.04 LTS working perfectly with Unity and Unity 2D.
FAT_CLIENT_DESKTOPS="ubuntu-desktop"



6b. Optional step to disable NBD compression

NDB compression is enabled by default in Ubuntu 12.04 to speed up client disk access and boot times, but takes a much longer to generate a compressed image file. During development work is might be easier to disable this feature and re-enable it when the setup of the client image is complete. 
Open the Terminal Window and enter :

sudo gedit /etc/ltsp/ltsp-update-image.conf

Add NO_COMP="-noF -noD -noI -no-exports" line to disable compression. Enable the compressing by adding the # symbol, or delete the line completely
Make sure the file now looks like this example below and save.

# Configuration file for ltsp-update-image
# Do not compress the client image. Comment out the line below to enable again.
NO_COMP="-noF -noD -noI -no-exports"




6c. Build the i386 (32bit)  LTSP Thin/Fat Client

This step builds the 32bit Thin Client Ubuntu 11.04 image needed to boot the thin clients on the network.
This step downloads and installs all the 32bit Ubuntu client elements. Could take a while.
Open the Terminal Window and enter :

sudo ltsp-build-client --arch i386

​​Tip: to set up 64bit thin clients  leave out the '--arch i386' part and enter: sudo ltsp-build-client 



7. Reboot your new LTSP server to complete LTSP server install

At this point your Ubuntu LTSP server should be up and running. 
You should be able to boot a Thin Client via the network.
You could also set up a Virtual Machine to act as a thin client for testing your server. See: How to create a VirtualBox Ubuntu LTSP Thin Client.


Tip: After reboot make sure that the DHCP is running correctly. Open a Terminal Window and enter:
sudo /etc/init.d/isc-dhcp-server status

Tip: If after this point you change your IP address on the LTSP  server you need to enter the following :
sudo ltsp-update-sshkeys
sudo ltsp-update-image --arch i386

 

8. Set up Thin Client Admin user 

Replace the adminname with your admin user name.

sudo -s -H
chroot /opt/ltsp/i386
useradd -m adminname -G sudo
passwd adminname
exit
exit


Lock the admin account's password

sudo chroot /opt/ltsp/i386 passwd -l adminname

Update the client image

sudo ltsp-update-image --arch i386

 

9. Set up a Thin Client User Account

9a. Open Users and Groups

Make sure you have gnome system tools installed as this has been removed in Ubuntu 12.04.

sudo apt-get install gnome-system-tools

In Ubuntu 12.04 search for Users and Groups under applications after installation.




9b. Click Add to add new user account



9c. Add new username details



9d. Add new user password



9e. Change User Advanced Settings -> User Privileges





10. Boot your Thin Client from the Ubuntu LTSP server

Connect your Thin Client computer or Virtual Machine to your LTSP network Switch/Hub.
Alter the Thin Client Machine BIOS Boot settings to boot from LAN / Network.
Boot the machine.
If all is set up correctly you should see the following Ubuntu LDM login screen on your Thin Client.
You will be able to login with your newly created Thin Client username and password.